收藏本站
The product information in this catalog is for reference only. Please request the Engineering Drawing for the Series Miniature Waterproof Shielded Connectors
information.
No.
Illustration
Operation
5
1
Solder termination fixture
Body / insulator assembly
Crimping of the Shielding Clamp
1
After completion of the soldering operations
carefully remove (holding on the locking collar)
the body/insulator assembly from the solder
termination fixture.
Note
Soldered joints
Exercise caution not to damage or deform the
solder joints.
2
Wires
Cable outer jacket
Copper tape
Cable outer jacket
2
Wrap the folded over shielding mesh with 5 to
6 mm wide copper tape to assure that it will
not become loose.
Apply the copper tape so that the shielding
mesh does not protrude from under it.
Shielding mesh
Copper tape
5 to 6mm
Note
After wrapping the copper tape, the tape
should overlap itself by 2 mm max.
3
3
Insert the “U” shaped shielding clamp over the
Ground clamp
Copper tape
Cable outer jacket
1±0.5mm
Copper tape
Cable outer jacket
copper tape as shown on the illustration.
It is critical that the overlap of the copper tape
is located inside the shielding clamp as shown
on the illustration.
Note
When the end of the copper tape wrapping is
positioned at the open side of the ground
4
Wires
Shielding mesh
Overlap of the copper tape
E
Shielding clamp
Commercially
available pliers
4
fitting, the end portion of the copper tape
wrapping will no longer be covered by the
ground fitting when the ground fitting is
crimped.
Using commercially available pliers bend the
open ends of the shielding clamp as illustrated,
assuring that it stays in place. The dimension
of E. between opposing edges of the shielding
clamp is necessary to assure correct final
crimp.
Table 5
Shell size
E
Shielding clamp
Overlap of the copper tape
LF07
LF10
LF13
5mm max.
7mm max.
11
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
LP-50 RCA COAX LOOPING PLUG 50 OHM
LPH-50 COAX LOOPING PLUG HI FREQ & PWR
LPL-50 RCA COAX LOOP PLUG 50 OHM
LPMWHF MINI WECO LOOPING PLUG HI FREQ
LPTW-124 TWINAX LOOPING PLUG 124 OHM
LPTWM-78 MINI TWINAX LOOPING PLUG 78 OHM
LPTWM2TP-78 MINI TWINAX LOOP PLUG 78OHM 2PTS
LPW-75 STD WECO LOOPING PLUG 75 OHM
相关代理商/技术参数
LF13-WBP-20S 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors
LF13WBP-20S 功能描述:标准环形连接器 20P PLUG SHELL SZ 13 FEM AU TERM IP67 RoHS:否 制造商:Hirose Connector 系列:EM-W 产品类型:Accessories 位置/触点数量:1 触点类型: 触点电镀: 安装风格:Cable 外壳材质: 端接类型:Clamp 电压额定值:
LF13-WBP-3P 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors
LF13-WBP-3S 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors
LF13-WBP-4P 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors
LF13-WBP-4S 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors
LF13-WBP-6P 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors
LF13-WBP-6S 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors